| 0Tower-type Induction Heater-- DCL- T
1. Working condition:
i. Voltage: AC220V
ii. Max current: 10A
2. Advantages:
i. Housed in a completely shielded, compact, robust metal casing with the lowest magnetic field raditions.
ii. Adopting the Air-cooling method, which avoiding the inconvenience of assembly and maintenance for the water cooling method.
iii. High efficient, the small workpieces can be heated up to 200C within 5-15s, it can be worked with the manipulators and suitable for the assembly line working. It can also be tailor made solutions combining robot applications with heating and joining units. For example: camshaft assembly, etc.
iv. Working with the supersonic frequency, no noise pollution.
v. The exact temperature control and the constant temperature hold are included, the range of heating temperature is from 0-400C, the induction heater can be stopped automatically at the setting temperature.
vi. Timing heating mode is available within 99min59sec.
vii. Auto-demagnetization.
viii. Up-to-date microprocessor technology for minimal power consumption. Ease of operation for maximum process control.
3. Scope of specification:
i. Typically heating the ring shaped metal workpieces, such as bearings, gears, sheft-couplings, etc. (the external closure workpieces is also available.)
ii. Heating positions: ID: 20-120MM
iii. Max OD:260mm
iv. Max thickness: 120mm |
