| model |
TIH 210M |
| discription |
large induction heater |
| SKFm 20 |
210 Kg (460 lb) |
| (voltage) V/Hz |
self-adjustment400V/50Hz--460V/60Hz |
| workpiece |
|
| max weight |
300kg (660 lb) |
| max inside diameter |
60-600mm (2.4*24in) |
| temperature control |
|
| scope |
0-250 32-482 H |
| magnetic temperature probe |
|
| accuracy(electronic) |
3 5 H |
| time control |
|
| scope |
0--60 0-60min |
| accuracy |
0.01 (second) |
| max heating temperature |
400 750 H |
| temperature controlled mode |
yes |
| preset value for heating temperature |
yes |
| low-power mode |
20-40-60-80% four steps |
| auto-demagnetication according to SKF |
yes < 2A/cm |
| heating bearing with seals |
yes |
| heating bearing preassembled with grease |
yes |
| error indicate code |
yes |
| overheat protection |
yes |
| max magnetic flux |
1.5T |
| control panel |
LED LED keyboard |
| w*h area between two clumns |
250*250mm (9.8*9.8in) |
| coil diameter |
135mm (5.3in) |
| w*d*h figure size |
600*350*420mm (24*13.7*16.5in) |
| complete machine weight(incl yoke) |
75 Kg (165 lb) |
| max power |
10.0 kVA |
| standered yoke quanlity |
2 |
| standered yoke size |
70*70*420mm (2.8*2.8*16.5in), |
| 100mm 3.9in ;available for ID more than 100mm(3.9in) |
| 40*40*420mm (1.6*1.6*16.5in), |
| 60mm 2.4in ;available for ID more than 60mm(2.4in) |
| section of core |
70*70mm (2.8*2.8in) |
| spare yokes location |
yes inside the machines casting |
| slide arm |
yes |
| turning arm |
-- |
| cooling fan |
available |
| case material |
aluminium |
| warranty length |
three years |
